Yes, polyaspartic ester coating is an excellent topcoat material that is compatible with most floor coatings. Our company can provide a combined construction solution of polyaspartic ester coating and epoxy coating.

When the construction process is carried out correctly and regular maintenance is performed subsequently, the service life of our polyurethane coating can reach 20 years.

Yes, we offer a wide range of colors for selection and customization. Please contact us to obtain the color chart.

It is not necessary. Only the matched primer needs to be used.

The curing time is significantly affected by temperature. Taking 25℃ as an example: ① Surface drying time:About 4–6 hours. ② Hard drying time: About 12–24 hours. ③ Complete curing: About 72 hours.For industrial applications or heavy-load scenarios, it is recommended to extend the curing period to 7 days..

It's a "value investment" rather than a "cost expenditure". We recommend communicating from these perspectives: Lifecycle cost: Although initial material cost is higher, its exceptionally long service life (often promised over 10 years) means less frequent recoating and maintenance costs, making it more economical in the long run. Time value: For commercial properties (e.g., hotels, malls, storefronts), fast construction means minimal business interruption and indirect losses. Added value from exceptional performance: Unmatched weather resistance and color retention ensure long-term aesthetics of the property, enhancing its curb appeal, which is particularly important for high-end residences or commercial clients who need to maintain an image. Offering warranty: Due to its excellent performance, you can more confidently offer long-term quality guarantees, which itself is a powerful sales tool.

Suitable for various substrates including concrete, metal, and old epoxy floors. However, the substrate must be clean, dry, firm, and free of looseness. New concrete needs to be fully cured (over 28 days). Old floors are recommended to be ground and repaired before application.

Environmental requirements: Recommended application temperature 10℃-35℃, humidity below 85%. Substrate preparation: Must achieve Sa2.5 cleanliness and appropriate roughness through grinding and cleaning. Pot life after mixing: Typically 30-60 minutes (at 25℃), recommended to mix in small batches and apply promptly. Application method: Can be rolled, sprayed, or troweled; choose the appropriate technique based on project needs.

With normal use and maintenance, indoor service life can exceed 10 years. In outdoor exposed environments, it can maintain without chalking or cracking for 5-8 years.

High wear resistance and compressive strength, capable of withstanding frequent heavy equipment and vehicle traffic; seamless, dustproof, leak-proof, chemically resistant (acid, alkali, oil resistant); strong adhesion, bonds firmly with substrate and colored quartz, not easy to detach; rich colors, customizable patterns, combining decorative and functional aspects.

Conventional thickness is 2-5mm. It can be designed based on load requirements: 2-3mm for light-load areas, 3-5mm or with an added mortar reinforcement layer for heavy-load areas (e.g., forklift passages).

Suitable for various landscape gardening, greening projects, public parks, courtyard gardens, pot plant mulching, slope protection, etc. Particularly suitable for slopes, windy areas, or high-activity zones, solving the problem of mulch easily washing away.

Completely safe. The formula is water-based and eco-friendly, contains no heavy metals or harmful chemicals, does not affect soil pH or microbial activity, and does not hinder plant growth.

The product has excellent water resistance and UV resistance, can withstand normal rainfall and temperature variations. In heavy rain or extreme weather, re-spraying might be necessary. It is advised to check weather conditions before application, ensuring no heavy rainfall within 24 hours after application.

Polyaspartic resin feature extremely fast curing (can be completed and put into use within hours), excellent weather and UV resistance, high elasticity, and abrasion resistance. At the same time, it cures stably even at low temperatures and has low VOC content, better meeting environmental requirements.

The type and condition of the old coating need to be evaluated. If the old layer is epoxy with good adhesion, it can be applied directly after grinding and cleaning. If there is peeling, oil contamination, or compatibility issues, completely removing the old coating is recommended.

The core advantage of Polyaspartic resin lies in the perfect combination of "high efficiency & fast drying" and "exceptional performance". Extremely fast curing: Surface dry time can be as short as 60 minutes, walkable in 6 hours, open to traffic within 24-48 hours. This greatly shortens construction cycles, reduces site downtime, allowing you to complete more projects in a day, improving profitability and customer satisfaction. Wide application window: Less sensitive to temperature and humidity, can be applied in broader ranges (e.g., 0-35°C, high humidity), reducing weather-related delays. Superior durability: Excellent UV resistance, yellowing resistance, chemical resistance (e.g., gasoline, oil), and abrasion resistance. The coating has good flexibility, resisting propagation of concrete micro-cracks, with a service life far exceeding traditional epoxy. High-build capability: Can achieve high film thickness in a single application, simplifying steps and better achieving texture or mortar systems.

 For relatively smooth cement floors after grinding: Primer: 0.2 Kg per m²; Colored epoxy: 0.3 KG per m². Flake usage depends on customer requirements for color density on the floor surface; typically, flake sizes of 1-3mm or 3-5mm are chosen. Polyurea topcoat requires 0.2-0.4 KG per m². These are general references; usage can be adjusted based on actual conditions.

Metallic epoxy flooring has strong design and decorative appeal and is used in high-traffic areas, thus requiring high-performance materials: transparent epoxy resin with excellent leveling, solvent-free, low VOCs, more environmentally friendly, self-degassing, high gloss and smooth, mark-free surface after curing, and good blending/dispersion with pearl powder, allowing for flow and gradient effects after curing; fast-curing transparent epoxy resin is needed to reduce project timelines and save labor costs; it must have high hardness and scratch resistance. Our products, due to their superior performance and high cost-effectiveness, are purchased and used in large quantities by many distributors and contractors.

As a professional epoxy flooring material manufacturer, we can provide customers with one-stop material supply and services. We not only supply materials for various construction layers (primer, mid-coat, color powder, topcoat, etc.) but also offer other related flooring materials to enrich distributors' product lines, along with product and construction-related technical support.