Huizhou Jincheng Composite Materials Co., Ltd.
+86 181 6574 7953
Superior UV | Color Stability | High-Build Mortar Capability|Rapid Curing & Fast Turnover|Unmatched Adhesion & Interlayer Bonding
Our two-component elastic Polyaspartic mortar mid-coat sits between the primer and the topcoat in waterproofing and protective flooring systems. Built on polyaspartic ester and aliphatic polyisocyanate, it resists yellowing, chalking, and UV degradation. The cured film has high elongation and good impact resistance, so it bridges concrete micro-cracks and follows thermal movement while keeping the waterproof layer continuous. The mortar formulation builds thick in a single pass, leveling the substrate, filling pinholes, and repairing surface damage. It bonds firmly to epoxy and Polyaspartic primers and to concrete, with short recoat intervals and a faster project schedule. Suited to roofs, balconies, and bridge decks, as well as warehouse and factory floors. OEM supply available.
Share to

Our two-component elastic Polyaspartic mortar mid-coat is an intermediate layer for waterproofing and protective flooring systems. It sits between the primer and the topcoat, where it levels the substrate, relieves stress, and carries the membrane across cracks that would otherwise show through to the surface.
The binder is built on polyaspartic ester and aliphatic polyisocyanate. Because the isocyanate is aliphatic, the cured film resists yellowing, chalking, and UV degradation. The layer stays stable on balconies, roof decks, and open car parks as well as in covered areas. Polyaspartic chemistry also cures quickly. Recoat intervals are shorter than with conventional polyurethane or epoxy systems, so a multi-layer build finishes sooner and labor costs come down.
Waterproofing performance starts with flexibility. The cured mortar coat combines high elongation with good impact resistance. It follows thermal expansion, minor substrate movement, and dynamic loading without cracking or losing bond. Concrete micro-cracks are bridged rather than transmitted, which protects the topcoat above and keeps the barrier continuous and leak-resistant across the whole deck.
The mortar formulation allows a thick build in a single pass. Applied by trowel, notched squeegee, or heavy-duty roller, it fills pinholes, evens out uneven concrete, and repairs surface damage in the same operation. Where a heavier build or a slip-resistant texture is needed, quartz sand or other aggregate can be added to the mix.
Interlayer adhesion decides whether a mid-coat works in practice. This product bonds firmly to epoxy and Polyaspartic primers, properly prepared concrete, and cementitious screeds. It also accepts compatible topcoats without delamination, so primer, mid-coat, and topcoat behave as one monolithic system.

Typical applications
Waterproofing systems: flat roofs, balconies, podium decks, and bridge decks that need a flexible intermediate layer under the wearing surface.
Commercial and industrial floors: warehouses, manufacturing plants, pharmaceutical facilities, and logistics hubs with heavy forklift traffic.
Architectural and decorative spaces: parking structures, outdoor plazas, sports venues, and showrooms where long-term UV stability matters.
Technical summary
OEM and private-label supply is available on request.



High-transparent crystal epoxy resin R & D and production for 20 years.
Over 10 years experience for exporting.
Quality Control : same workers for material feeding and same person to supervise and record data for every batch ; Taking sample to test and mark the details for batch.
ROHS,REACH,CPSIA,BPA,TRA, EN71 ,FDA etc. SA8000 social responsibility system, IS09001 quality system.
We are good at providing solution service for each industry product within 3 days.

Fast delivery : Capacity production 1000 tons per month , 3~5 days delivery for batch order.
20 sets of automatic production equipment. 5 OEM production lines. Plant area 20000 square meters.



                             3 days delivery for R&D sample

Â