Huizhou Jincheng Composite Materials Co., Ltd.
+86 181 6574 7953
Summer-grade | excellent weather resistance | color stability | good abrasion resistance | waterproof | corrosion-resistant
Summer-grade polyaspartic resin is a two-component aliphatic polyaspartic polyurea formulated for application at temperatures up to 30°C. Its high-solids, low-viscosity body flows and levels well, leaving an even, glossy film on prepared surfaces.
Aliphatic chemistry gives the coating strong weather resistance and little tendency to yellow, so exposed floors keep their colour under sunlight and changing weather. The cured film is hard-wearing, abrasion resistant, and resists water and corrosion. Where traffic is heavy, wear-resistant aggregate can be added to the system to suit the finish and service conditions.
The resin goes on with conventional coating equipment. Mix both components at the specified ratio, check ambient and substrate temperature before starting, and size each mix to the working time stated in the technical data sheet. Adhesion depends on surface preparation and a suitable primer, and film thickness, recoat intervals and curing requirements should follow the data sheet.
With rich colour and a high-gloss finish, it suits indoor and outdoor floors where appearance matters as much as protection. It is a practical choice for seasonal flooring and protective coating projects in warm weather. Long-term performance depends on preparation, thickness, exposure and the complete system, so confirm chemical resistance data for demanding environments.
Share to

Summer-Grade Polyaspartic Floor Coating Resin
Summer-grade polyaspartic resin is a two-component aliphatic polyaspartic polyurea, formulated for application in warm conditions up to 30°C. Its high-solids, low-viscosity body flows and levels well on properly prepared substrates, leaving an even, glossy film.
Built for warm-weather work
Seasonal flooring jobs rarely wait for ideal conditions. This resin is designed to be applied and cured at temperatures up to 30°C with conventional coating equipment. Check both ambient and substrate temperature before starting, and size each mix to the working time given in the technical data sheet (TDS).

Weather and colour stability
Aliphatic chemistry gives the coating strong weather resistance and little tendency to yellow, so exposed surfaces keep their colour under sunlight and changing weather. Long-term results still depend on surface preparation, film thickness, exposure and the complete coating system.
Wear, water and corrosion resistance
The cured film is hard-wearing and abrasion resistant, and it resists water and corrosion. Where traffic is heavy, wear-resistant aggregate can be added to the system, chosen to suit the finish and service conditions. Adhesion relies on correct preparation and a suitable primer. For specific chemical exposure, review the resistance data before specifying.
Colour and gloss
The coating delivers rich colour and a high-gloss surface, which suits indoor and outdoor floors where appearance matters, subject to the project specification.
Application
Prepare the substrate, mix the two components at the specified ratio, and apply within the working time. Film thickness, recoat intervals and curing requirements are set out in the TDS.



High-transparent crystal epoxy resin R & D and production for 20 years.
Over 10 years experience for exporting.
Quality Control : same workers for material feeding and same person to supervise and record data for every batch ; Taking sample to test and mark the details for batch.
ROHS,REACH,CPSIA,BPA,TRA, EN71 ,FDA etc. SA8000 social responsibility system, IS09001 quality system.
We are good at providing solution service for each industry product within 3 days.

Fast delivery : Capacity production 1000 tons per month , 3~5 days delivery for batch order.
20 sets of automatic production equipment. 5 OEM production lines. Plant area 20000 square meters.



                             3 days delivery for R&D sample

Â